845.679.2862 | Hours: MON-SAT 7-6 | SUN 8-5 | 84 Tinker St. Woodstock, NY 12498 | Get Store Directions
LOG IN ACCOUNT
Auto Shut Off Timers & Switches
Universal vacancy and occupancy sensor. Manages lighting and motor loads with a choice of manual-on or automatically on switching. Replaces single pole switch. Compatible with screw based 300W incandescent, 150W LED (light emitting diode) and CFL (compact fluorescent), 200W ELV, MLV, and fluorescent, and motor loads such as exhaust fans. Features a time delay which allows user to delay the sensor from switching off for 30 seconds, 5 minutes, or 30 minutes. Wall plate not included. 5-year warranty.
Use this easy-to-set timer to set a running time for bathroom exhaust fans or lighting. Choose from 5, 10, 15, or 30 minute time periods. This timer is simple-to-install, it replaces a standard light switch plate and fits a standard decorator switch plate. The timer provides a simple, yet effective way to leave the bathroom exhaust fan on without having to remember to turn it off later; in addition, using this timer cuts down on wasted energy use since lights and fans can be timed to only be On when needed. It is compatible with compact fluorescent bulbs. Color: White. Ratings: 120V (volt) AC (alternating current), 60 Hz (hertz). 15A (ampere)/1800W (watt) Resistive, 8.3A/1000W Tungsten, 8.3A/1000VA (volt-ampere) Ballast. Controls up to 1/4 HP (horsepower).
This 30 minute in-wall timer will ensure your bathroom exhaust fans, basement lights, bathroom heat lamps, and ceiling fans turn Off after a set amount of time, saving money and appliance and bulb use. Simply turn the dial to the desired running time (30 minutes maximum) and the connected light or appliance will shut Off at the set time. Installation is easy, just install in place of existing wall switch (standard or decorator wall plate). Color: Gray. Compatible with compact fluorescent bulbs. Ratings: 125V (volt) AC (alternating current), 60Hz (hertz). 20A (ampere)/2500W (watt) Resistive, 8A/1000W Tungsten, 5A/625VA (volt-ampere) Fluorescent, 15FLA (full load amps), 90LRA (locked rotor amps).
Outdoor wireless remote and plug-in receiver. Turns outdoor lights on and off. Works through doors, walls, and around corners. Wireless hand-held remote can be attached to key chain. Plug-in receiver can be mounted outside. Ideal for holiday decorations. 2.5 In. W. x 5.6 In. H. x 1.5 In. D.
Custom set this programmable timer to turn lights, exhaust, and ceiling fans, space heaters, and other appliances On and Off at certain times of the day - the settings repeat weekly, allowing you to set it and walk away; use up to 7 settings per day or 49 per week. 1 potential use is to turn On lights in your house when no one is home, making it appear your home is occupied, deterring burglars and increasing security. Other handy features include simple push-button settings, self-recharging battery back-up in case of power failure, and compatibility with compact fluorescent bulbs. Installation is easy, it replaces a standard light switch plate and fits a standard decorator switch plate. Realize energy saving by timing appliances and lights to only be On when needed. 125VAC (Volts Alternating Current) 60Hz (hertz). 15A (ampere)/1875W (watts) Resistive, 8A/1000W Tungsten, 8A Ballast, up to 1/4hp (horse power) motor.
This 60 minute countdown timer will limit the running time of exhaust fans, lights, bathroom heat lamps, ceiling fans, and more. Now you can leave the bathroom exhaust fan running to reduce moisture and exit the room; the fan will automatically turn Off at the set time (up to 60 minutes later). Or connect this timer to light or heat lamps and cut down on energy and bulb usage. Compatible with compact fluorescent bulbs. Ratings: 125V (volt) AC (alternating current), 60Hz (hertz). 20A (ampere)/2500W (watt) Resistive, 8A/1000W Tungsten, 5A/625VA (volt-ampere) Fluorescent, 15FLA (full load amps), 90LRA (locked rotor amps).
This 60 minute countdown timer will limit the running time of exhaust fans, lights, bathroom heat lamps, ceiling fans, and more. Now you can leave the bathroom exhaust fan running to reduce moisture and exit the room; the fan will automatically turn Off at the set time (up to 60 minutes later). Or connect this timer to light or heat lamps and cut down on energy and bulb usage. Compatible with compact fluorescent bulbs. Ratings: 125V (volt) AC (alternating current), 60Hz (hertz). 20A (ampere)/2500W (watt) Resistive, 8A/1000W Tungsten, 5A/625VA (volt-ampere) Fluorescent, 15FLA (full load amps), 90LRA (locked rotor amps).